Fast Shipping
(within 48 hours)
Technical support
Contact us
buy online
(100% secure)
special offers
(all year round)
Intensiv ProxoStrip Anterior
400.00EGP
Clinically tested by University of Geneva, Swizterland
Ref. PXA4015/6
Package of 6 Strips
Ref. PXA4015/12
Package of 12 Strips
A short metal strip, diamond-coated on one side, with two working areas of different-sized grits: 40μm (red) and 15μm (yellow)
To achieve optimum instrument control in specific areas of the oral cavity, it is necessary to use a system which allows for gripping in proximity of the operational field.
Intensiv ProxoStrip Anterior is a unique double diamond-coated metal strip with two working areas, a grit of 40μm (red) and 15μm (yellow) respectively and perforated strip ends for a secure and ergonomic grip. The total length of the strips (55mm) enables simplified finger support (hypomochlion) during treatment. The 2.5mm width of the strip — as well as the free zone between the working areas — preserves the existing contact point.
Related products
IDENTIUM® HEAVY
Identium® Heavy is a high-viscosity monophase precision impression material made of Vinylsiloxanether® that delivers particularly good results in the one-step technique thanks to the optimal pressure build-up when combined with Identium® LightINDICATIONS
Identium® Heavy is highly recommended for:
- One-step impressions
- Perfect flow even with residual moisture enables the preparation margins to be reliably determined.
- Thanks to the short intraoral setting time, there is no deformation during the setting phase.
PANASIL® INITIAL CONTACT LIGHT
Initial contact Panasil® is a low-viscosity silicone-based impression material with a particularly high initial water capacity for accurate impression technology - reliable even in extreme cases.INDICATIONSThe use of panasil® primary contact light is highly recommended for:
One-step impressions
Arrange impressionsPRECISE IMPRESSIONSIt flows optimally and, thanks to its exceptional initial waterability, also guarantees reliability and accuracy in difficult oral situations.
Dimensionally stable elastic recovery.EASY PROCESSINGFast and easy to apply using all conventional dispensing guns such as Applyfix® 4 for impression materials.EASY TO WORK WITHLow viscosity and stable at the same time, practical working time, short adjustment time inside the mouth.
Also available as a quick-setting material with 3 minutes. Total setup time.
Build-It syringe Material
Fiber-Reinforced automix core build-up systemClinically proven, Build-It!® F.R. is now available in a very convenient Mini-Mix syringe. Now you can auto-mix without a gun. Get easier access to the preparation, better visibility and less waste.FASTER Build-It!® F.R. is an automix system, just like impression material cartridges. Using the intra-oral tips, you can inject right into the preparation or into the Core-Forms. Core build-up has never been this easy.LESS EXPENSIVEمع Build-It! ® F.R. ، لا تدفع المزيد مقابل الراحة - في الواقع ، Build-It! ® F.R. يمكن أن تكلف ما يصل إلى 5 مرات أقل من المواد الأساسية المقارنة. يضمن نظام توصيل الخرطوشة أيضًا مزج ما تحتاجه بالضبط - مع كمية صغيرة فقط من النفايات في طرف الخلط.اختر من بين درجات الألوان A2، A3، الأبيض العاتم، الذهبي، والأزرق في خراطيش خلط تلقائي سعة 25 مل/48 جم أو محاقن Mini Mix™ سعة 4 مل.مزايا المنتجسهولة الاستخدام - يتدفق ويُكدس أينما تريد دون أن ينكمشمتعدد الاستخدامات - مصمم لتوفير تنوع وأداء مثاليينأداء مثبت - أساسات قوية وموثوقة تم اختبارها سريريًاحائز على جوائز - نتائج فعّالة حازت على العديد من الجوائزالاستخداممادة مركبة من الراتنج المقوى بالألياف، ثنائية المعالجة، تُستخدم لاستعادة التاج أو بنية السن المفقودة.
Bond-1™
Bonding Agents
Total Etch Primer/Adhesive
Bond-1 Primer/Adhesive is a 5th generation total-etch bonding system that provides high bond strengths in a convenient single bottle application. This versatile system can be used for all your bonding procedures. Bond-1 Primer/Adhesive has been proven to create the ideal sealed surface and interpenetrated network of the polymerized primers and unfilled resin, resulting in a high bond with a low film thickness of only 8µm.Product Benefits
Simple, time-saving and reliable fastening system
High adhesion strength for both dentin and enamel
A very versatile system - direct or indirect binding, with light compounds or chemical treatment, porcelain, metal restorations and Amalgam to the dental structure
The low film thickness ensures the ideal surface for adhesion to restorative materials
Intensiv UniglossPolisher
Intensiv UniglossPolisherScientifically proven and clinically tested at the University of Zurich, Switzerland
Ref. 2300/6: trial pack with 3 polishers each, flame and cup
Ref. 2310/6: pack of 6 polishers, flame
Ref. 2320/6: pack of 6 polishers, cup
Stable polymer diamond polisher shape for high gloss polishing for aesthetic restorations
"The flame remains a flame even with multiple use!".
A thin flame and a stable cup of polymeric material loaded with a high degree of ultra-fine diamond. The heart of the new shape of the polisher is made of additional hard plastic and completely follows the shapes of the flame and cups.
Extremely smooth and glossy surfaces for aesthetic restorations remain the basic requirement for all long-term oral restorations as well as the overall improvement of aesthetic aspects in appearance.
For clear restorations of concave and convex surfaces, the most suitable polishing tool should be selected.
The preservation of the created macro-geography and the closed margins of the restorations during polishing are the aesthetic fundamentals and longevity of sound restorations.
Bond-1™ SF
Bonding Agents
Solvent-Free Self Etch AdhesiveBond-1 SF Solvent-Free SE adhesive is a light-curing, single-layer, self-drilling adhesive that is truly in its own union! Pentron has effectively removed the solvent, present in virtually all other adhesives on the market today, while maintaining the high bond strength associated with conventional bonding agents. Bond-1 SF forms a reactive bond between the minerals of the tooth structure and the resins of the bonding agent, without the use of acetone, water or alcohol, providing a super Bond for both dentin and enamel.Bond-1 SF Solvent-Free SE adhesive is available in a convenient system for connecting syringes, offering unique flowing needle tips that facilitate easy and straightforward setting-up.Solvent-free - Protects against allergies, eliminates common technology-sensitive problems such as underdrying and overdrying. It also prevents evaporation
No air drying - Saves you precious Chair time ; doesn't leave you guessing "how dry is too dry"
Self-etch - No need for acid etching, saves time
Versatile - Bond - 1 SF is ideal for all your direct composite bonding needs and can also be used with double curing materials when the initial layer of double curing material is processed
Unique handling properties - Allows an even distribution of the material, ensuring complete coverage and optimal results
One coat - Easy to use, reduce the procedure time
