Bite registration materials with elastomeric properties and easy handling, accurate results thanks to high final hardness of the material.
Shore D hardness 43.
Set Time: 2 minutes
Visalys® Core Dentin
Panasil® Initial Contact Regular
Panasil® Initial Contact Regular higher body wash viscosity great when used with Monophase, Panasil® Tray or Panasil&Reg; Putty viscosities. When more rigidity is desired such as when performing implant transfers. Working time 1 minute 30 seconds Intraoral setting time 2 minute 30 seconds, Total setting time 4 minutes.
FUTAR® D & FUTAR® D FAST
Futar D is an injectable flexible bite recording material based on silicone to create accurate impressions of the occlusal state and is available in both regular and fast versions. Futar D & Futar D Fast can be used for bite recordings and is suitable for applications requiring hard silicone. Thanks to its short working time, Futar D Fast is especially useful for small applications.
PANASIL® INITIAL CONTACT LIGHT
Initial contact Panasil® is a low-viscosity silicone-based impression material with a particularly high initial water capacity for accurate impression technology - reliable even in extreme cases.INDICATIONSThe use of panasil® primary contact light is highly recommended for:
One-step impressions
Arrange impressionsPRECISE IMPRESSIONSIt flows optimally and, thanks to its exceptional initial waterability, also guarantees reliability and accuracy in difficult oral situations.
Dimensionally stable elastic recovery.EASY PROCESSINGFast and easy to apply using all conventional dispensing guns such as Applyfix® 4 for impression materials.EASY TO WORK WITHLow viscosity and stable at the same time, practical working time, short adjustment time inside the mouth.
Also available as a quick-setting material with 3 minutes. Total setup time.
PANASIL® MONOPHASE MEDIUM
50mlPanasil® monophase Medium is a single-phase medium-viscosity impression material based also on silicone in a convenient 5: 1 Jumbo cartridge. The initial hydrophilicity is particularly high for accuracy even in extreme cases.INDICATIONSPanasil® monophase Medium is highly recommended for:
Single-phase impressions
Installation impressions
Career impressions
Pick-up impressionsPRECISE IMPRESSIONSIt flows optimally and, thanks to its exceptional initial waterability, also guarantees reliability and accuracy in difficult oral situations.
Dimensionally stable elastic recovery properties.UNIVERSALLY APPLICABLEJust as suitable for preparing crowns/bridges, inlays/ onlays, and veneers as for fixation impressions.PERFECTLY CUSTOMIZEDThe practical, short intraoral setting time (2:00 min) combined with high final hardness (Shore A 60) enable particularly precise impressions of the three- dimensional relationships in the fixation.
PANASIL® TRAY SOFT HEAVY
Panasil® tray is a high-viscosity, stiff Heavy body based on A silicone for precision impressions available in the 5:1 jumbo cartridge.INDICATIONSThe Panasil® Soft Heavy tray is highly recommended for:
One-step impressionsEASY PROCESSINGHigh dynamic pressure and can be very easily trimmed.SECURITY THANKS TO PRECISIONDimensionally stable elastic recovery and consistent quality thanks to exact, reproducible dosage from the easy to use jumbo cartridge.ALWAYS THE RIGHT PRODUCTThe Soft version has a lower final hardness (Shore A 55) to ensure that it can be removed even more easily from the mouth.
Identium® Light Fast-Set, Cartridge Normal Pack
Low viscosity, injectable material. Especially suitable for the technique of double mixing (in combination with high-viscosity Identium) of impressions for the manufacture of crowns, bridges, inlays, inlays, fittings, impressions for removable dentures and changing impressions available in a 1: 1 cartridge system in a regular set and a quick set version.Product information
Classification of impression materials
الفئة الفرعية Identium®-Vinylsiloxanether
Item number
Preliminary information
Fast viscosity
1: 1 delivery system
Color Purple
FUTAR® CUT & TRIM FAST
Futar Cut & Trim Fast is a silicone-based flexible bite-recording injectable and injectable material for creating accurate impressions of the occlusal state and is suitable for applications requiring hard silicone. Thanks to its short working time, Futar Cut & Trim Fast is especially useful for small applications. Futar Cut & Trim Fast can also be used for visual recording of occlusion information for CAD / CAM systems without the use of powders.
FUTAR® D SLOW
SILGINAT
Silginat is a medium-viscosity, elastomeric A silicone that was specifically developed for alginate applications (such as anatomical and opposing jaw impressions). High precision, the long-term storage stability, and the possibility of repeat pouring make for even more efficient impressions. Clean, simple, and reliable application with the 5:1 Jumbo cartridge ensures standardized and hygienic processes.
PANASIL® INITIAL CONTACT X-LIGHT
Initial contact Panasil® is a low-viscosity silicone-based impression material with a particularly high degree of initial hydrophilicity for accurate impression technology - reliable even in extreme situationsINDICATIONSThe use of Panasil® X-Light initial contact technology is highly recommended for:
Two-step impressions
Arrange impressionsPRECISE IMPRESSIONSIt flows optimally and, thanks to its exceptional initial waterability, also guarantees reliability and accuracy in difficult oral situations.
Dimensionally stable elastic recovery.EASY PROCESSINGFast and easy to apply using all conventional dispensing guns such as Applyfix® 4 for impression materials.EASY TO WORK WITHLow viscosity and stable at the same time, practical working time, short adjustment time inside the mouth.
Also available as a quick-setting material with 3 minutes. Total setup time.
