Click to enlarge
FibreKleerTM 4x Fiber Post 4,950.00EGP
Back to products
Kavitan™ CEM 1,800.00EGP

Kavitan™ Plus

1,700.00EGP

Glass-Ionomer Cement

* Notice : Prices are always changing due to market fluctuations and prices will be confirmed before shipment, and you can inquire by contacting by phone or by requesting a quote.

Request for Quotation
Category: ,
Description 
Cavitan Plus glass ionomer cement
Cavitan Plus glass ionomer opaque X-ray cement
Cavitan Plus is an X-ray opaque cavitan Plus glass ionomer cement in the form of powder and liquid. This X-ray opaque ionomeric glass material with high compressive strength and wear resistance is a convenient alternative to lost ivory as a restorative material and a lining-type"base".

Cavitan Plus is available as a two-component system: 15 grams of powder + 15 grams of liquid. The powder is presented in two shades of VITATM A2 and A3 colors.

Product benefits
A long-lasting bond due to the strong chemical adhesion to the hard tissues of the teeth
High compressive strength and wear resistance
Highly X-ray opaque material
Biocompatible
The index
Fillings of the fifth and third categories in permanent teeth.
Fillings of the first two categories in milk teeth.
Adhesive lining under composite or amalgam fillings.
Accumulation of pulp before preparation for full-coverage fillings.
Temporary fillings in permanent teeth.

Mixing ratio

Mixing time

Working time

Setting time

1 scoop of powder to 1 drop of liquid

30 – 45 s

2:00 – 3:00 min

4:00 min

 

Related products

Correct Plus™ and Correct Quick™ Bite Registration Material

,
850.00EGP
الوصف صُممت شفرتا Correct Plus Bite Superfast و Correct Quick Bite لتوفير دقة عالية وتفاصيل دقيقة لنتائج العض. تتميز شفرات
Add to cart
Quick view

Intensiv UniglossPaste

,
737.44EGP
Intensiv UniglossPasteClinically tested and scientifically approved by the University of Zurich, SwitzerlandRef. 2500One-step ultra-fine universal diamond paste with fine grains uniquely adapted to the surface for a high-gloss finish for all aesthetic restorations Perfectly smooth and shiny surfaces of fillings and treatment of reconstructive prostheses remain the basic requirement for all long-term oral restorations as well as the general improvement of the manifestations of aesthetic aspects: unigloss intensive paste, thanks to its special composition of Fine Diamonds with all its own features, represents the ideal universal product for finishing aesthetic restorations.
Add to cart
Quick view

PANASIL® PUTTY SOFT

,
1,940.00EGP – 2,910.00EGP
Panasil® Putty is a classic kneadable precision impression material available in a tub. Thanks to continuous refinement, you benefit from 35 years of experience, quality, and reliability.EASY PROCESSINGCan be very easily trimmed.RECISE WHILE ALSO VERY COST EFFECTIVEThe price / performance ratio is dimensionally stable and outstanding. Very high dynamic pressure for optimal flow.ALWAYS THE RIGHT PRODUCTThe Soft version has a lower final hardness (Shore A 60) to ensure its removal from the mouth is even easier.INDICATIONSPanasil® paste is highly recommended for use in the following cases: Impressions of washing putty in one step Foil impressions
Select options
Quick view
Sold out

Bond-1™

,
0.95EGP
Bonding Agents Total Etch Primer/Adhesive Bond-1 Primer/Adhesive is a 5th generation total-etch bonding system that provides high bond strengths in a convenient single bottle application. This versatile system can be used for all your bonding procedures. Bond-1 Primer/Adhesive has been proven to create the ideal sealed surface and interpenetrated network of the polymerized primers and unfilled resin, resulting in a high bond with a low film thickness of only 8µm.Product Benefits Simple, time-saving and reliable fastening system High adhesion strength for both dentin and enamel A very versatile system - direct or indirect binding, with light compounds or chemical treatment, porcelain, metal restorations and Amalgam to the dental structure The low film thickness ensures the ideal surface for adhesion to restorative materials
Read More
Quick view

IDENTIUM® HEAVY

,
4,500.00EGP
Identium® Heavy is a high-viscosity monophase precision impression material made of Vinylsiloxanether® that delivers particularly good results in the one-step technique thanks to the optimal pressure build-up when combined with Identium® LightINDICATIONS Identium® Heavy is highly recommended for:
  • One-step impressions
GREATEST PRECISION
  • Perfect flow even with residual moisture enables the preparation margins to be reliably determined.
  • Thanks to the short intraoral setting time, there is no deformation during the setting phase.
TIME SAVINGAfter a total of only 3 minutes and 30 seconds, the impression can be removed from the patient's mouth (identity® Heavy Fast). More comfortable for user and patientIt is easy to remove from the mouth thanks to high elasticity; low risk of breakage during the manufacture of the model. Neutral taste and aroma. Short adjustment time inside the mouth, a significant decrease in the gag reflex and movement.
Add to cart
Quick view

Bond-1™ SF

,
150.00EGP
Bonding Agents Solvent-Free Self Etch AdhesiveBond-1 SF Solvent-Free SE adhesive is a light-curing, single-layer, self-drilling adhesive that is truly in its own union! Pentron has effectively removed the solvent, present in virtually all other adhesives on the market today, while maintaining the high bond strength associated with conventional bonding agents. Bond-1 SF forms a reactive bond between the minerals of the tooth structure and the resins of the bonding agent, without the use of acetone, water or alcohol, providing a super Bond for both dentin and enamel.Bond-1 SF Solvent-Free SE adhesive is available in a convenient system for connecting syringes, offering unique flowing needle tips that facilitate easy and straightforward setting-up.Solvent-free - Protects against allergies, eliminates common technology-sensitive problems such as underdrying and overdrying. It also prevents evaporation No air drying - Saves you precious Chair time ; doesn't leave you guessing "how dry is too dry" Self-etch - No need for acid etching, saves time Versatile - Bond - 1 SF is ideal for all your direct composite bonding needs and can also be used with double curing materials when the initial layer of double curing material is processed Unique handling properties - Allows an even distribution of the material, ensuring complete coverage and optimal results One coat - Easy to use, reduce the procedure time
Add to cart
Quick view

Intensiv ZirconCut Set

,
737.44EGP
Add to cart
Quick view

Build-It syringe Material

,
875.00EGP
Fiber-Reinforced automix core build-up systemClinically proven, Build-It!® F.R. is now available in a very convenient Mini-Mix syringe. Now you can auto-mix without a gun. Get easier access to the preparation, better visibility and less waste.FASTER Build-It!® F.R. is an automix system, just like impression material cartridges. Using the intra-oral tips, you can inject right into the preparation or into the Core-Forms. Core build-up has never been this easy.LESS EXPENSIVEمع Build-It! ® F.R. ، لا تدفع المزيد مقابل الراحة - في الواقع ، Build-It! ® F.R. يمكن أن تكلف ما يصل إلى 5 مرات أقل من المواد الأساسية المقارنة. يضمن نظام توصيل الخرطوشة أيضًا مزج ما تحتاجه بالضبط - مع كمية صغيرة فقط من النفايات في طرف الخلط.اختر من بين درجات الألوان A2، A3، الأبيض العاتم، الذهبي، والأزرق في خراطيش خلط تلقائي سعة 25 مل/48 جم أو محاقن Mini Mix™ سعة 4 مل.مزايا المنتجسهولة الاستخدام - يتدفق ويُكدس أينما تريد دون أن ينكمشمتعدد الاستخدامات - مصمم لتوفير تنوع وأداء مثاليينأداء مثبت - أساسات قوية وموثوقة تم اختبارها سريريًاحائز على جوائز - نتائج فعّالة حازت على العديد من الجوائزالاستخداممادة مركبة من الراتنج المقوى بالألياف، ثنائية المعالجة، تُستخدم لاستعادة التاج أو بنية السن المفقودة.
Add to cart
Quick view