Fast Shipping
(within 48 hours)
Technical support
Contact us
buy online
(100% secure)
special offers
(all year round)
Intensiv Cerinlay Set
737.44EGP
University of Berlin, Germany
Ref. 011
Special diamond instruments for inlay cavity preparations according to methods developed by the University of Berlin
Restorations using ceramic inlays require simple preparations with rounded interior edges and sharp cavity margins without beveling. The slightly tapered shape and suitable small diameters of these burs make undercut-free cavity preparation possible.
Related products
PANASIL® INITIAL CONTACT LIGHT
Initial contact Panasil® is a low-viscosity silicone-based impression material with a particularly high initial water capacity for accurate impression technology - reliable even in extreme cases.INDICATIONSThe use of panasil® primary contact light is highly recommended for:
One-step impressions
Arrange impressionsPRECISE IMPRESSIONSIt flows optimally and, thanks to its exceptional initial waterability, also guarantees reliability and accuracy in difficult oral situations.
Dimensionally stable elastic recovery.EASY PROCESSINGFast and easy to apply using all conventional dispensing guns such as Applyfix® 4 for impression materials.EASY TO WORK WITHLow viscosity and stable at the same time, practical working time, short adjustment time inside the mouth.
Also available as a quick-setting material with 3 minutes. Total setup time.
Intensiv UniglossPaste
Intensiv UniglossPasteClinically tested and scientifically approved by the University of Zurich, SwitzerlandRef. 2500One-step ultra-fine universal diamond paste with fine grains uniquely adapted to the surface for a high-gloss finish for all aesthetic restorations
Perfectly smooth and shiny surfaces of fillings and treatment of reconstructive prostheses remain the basic requirement for all long-term oral restorations as well as the general improvement of the manifestations of aesthetic aspects: unigloss intensive paste, thanks to its special composition of Fine Diamonds with all its own features, represents the ideal universal product for finishing aesthetic restorations.
Bond-1™ SF
Bonding Agents
Solvent-Free Self Etch AdhesiveBond-1 SF Solvent-Free SE adhesive is a light-curing, single-layer, self-drilling adhesive that is truly in its own union! Pentron has effectively removed the solvent, present in virtually all other adhesives on the market today, while maintaining the high bond strength associated with conventional bonding agents. Bond-1 SF forms a reactive bond between the minerals of the tooth structure and the resins of the bonding agent, without the use of acetone, water or alcohol, providing a super Bond for both dentin and enamel.Bond-1 SF Solvent-Free SE adhesive is available in a convenient system for connecting syringes, offering unique flowing needle tips that facilitate easy and straightforward setting-up.Solvent-free - Protects against allergies, eliminates common technology-sensitive problems such as underdrying and overdrying. It also prevents evaporation
No air drying - Saves you precious Chair time ; doesn't leave you guessing "how dry is too dry"
Self-etch - No need for acid etching, saves time
Versatile - Bond - 1 SF is ideal for all your direct composite bonding needs and can also be used with double curing materials when the initial layer of double curing material is processed
Unique handling properties - Allows an even distribution of the material, ensuring complete coverage and optimal results
One coat - Easy to use, reduce the procedure time
PANASIL® MONOPHASE MEDIUM
50mlPanasil® monophase Medium is a single-phase medium-viscosity impression material based also on silicone in a convenient 5: 1 Jumbo cartridge. The initial hydrophilicity is particularly high for accuracy even in extreme cases.INDICATIONSPanasil® monophase Medium is highly recommended for:
Single-phase impressions
Installation impressions
Career impressions
Pick-up impressionsPRECISE IMPRESSIONSIt flows optimally and, thanks to its exceptional initial waterability, also guarantees reliability and accuracy in difficult oral situations.
Dimensionally stable elastic recovery properties.UNIVERSALLY APPLICABLEJust as suitable for preparing crowns/bridges, inlays/ onlays, and veneers as for fixation impressions.PERFECTLY CUSTOMIZEDThe practical, short intraoral setting time (2:00 min) combined with high final hardness (Shore A 60) enable particularly precise impressions of the three- dimensional relationships in the fixation.
PANASIL® INITIAL CONTACT X-LIGHT
Initial contact Panasil® is a low-viscosity silicone-based impression material with a particularly high degree of initial hydrophilicity for accurate impression technology - reliable even in extreme situationsINDICATIONSThe use of Panasil® X-Light initial contact technology is highly recommended for:
Two-step impressions
Arrange impressionsPRECISE IMPRESSIONSIt flows optimally and, thanks to its exceptional initial waterability, also guarantees reliability and accuracy in difficult oral situations.
Dimensionally stable elastic recovery.EASY PROCESSINGFast and easy to apply using all conventional dispensing guns such as Applyfix® 4 for impression materials.EASY TO WORK WITHLow viscosity and stable at the same time, practical working time, short adjustment time inside the mouth.
Also available as a quick-setting material with 3 minutes. Total setup time.
Build-It syringe Material
Fiber-Reinforced automix core build-up systemClinically proven, Build-It!® F.R. is now available in a very convenient Mini-Mix syringe. Now you can auto-mix without a gun. Get easier access to the preparation, better visibility and less waste.FASTER Build-It!® F.R. is an automix system, just like impression material cartridges. Using the intra-oral tips, you can inject right into the preparation or into the Core-Forms. Core build-up has never been this easy.LESS EXPENSIVEمع Build-It! ® F.R. ، لا تدفع المزيد مقابل الراحة - في الواقع ، Build-It! ® F.R. يمكن أن تكلف ما يصل إلى 5 مرات أقل من المواد الأساسية المقارنة. يضمن نظام توصيل الخرطوشة أيضًا مزج ما تحتاجه بالضبط - مع كمية صغيرة فقط من النفايات في طرف الخلط.اختر من بين درجات الألوان A2، A3، الأبيض العاتم، الذهبي، والأزرق في خراطيش خلط تلقائي سعة 25 مل/48 جم أو محاقن Mini Mix™ سعة 4 مل.مزايا المنتجسهولة الاستخدام - يتدفق ويُكدس أينما تريد دون أن ينكمشمتعدد الاستخدامات - مصمم لتوفير تنوع وأداء مثاليينأداء مثبت - أساسات قوية وموثوقة تم اختبارها سريريًاحائز على جوائز - نتائج فعّالة حازت على العديد من الجوائزالاستخداممادة مركبة من الراتنج المقوى بالألياف، ثنائية المعالجة، تُستخدم لاستعادة التاج أو بنية السن المفقودة.
Flow-It™ ALC™
A0 /A1/ A2/ A3/ CLEAR / W.OPAQ
Flowable Composite that Cures in 3 Seconds!
Flow-It! ALC®, a composite reconstructive material treated with direct light from Pentron®, represents a different method of dental restoration. The Flow-IT company gathers! ® ALC is between the utmost beauty and the need for a substance that "flexes" with age. It is the ideal compound for Class V restorations, where aesthetics and durability are paramount. It is also strongly indicated for use as a base under Category II restorations. Due to its versatility, Flow-It! ALC ® is a material that your business cannot afford to do without.Two unique characteristics make Flow-It!® ALC stand out from the crowd
1. 1. Flow-It!® ALC contains a unique resin matrix with a blend of ethoxilated BisGMA, improving stain resistance.
2. Flow-It! ® ALC is really highly Flowable:Does not require any hardware
Requires little finishing
It does not flow out of the tooth due to its rheostatic properties
