Intennsiv UniglossPolisher Cup

0.00EGP(Price excludes VAT)

Initial contact Panasil® is a low-viscosity silicone-based impression material with a particularly high initial water capacity for accurate impression technology - reliable even in extreme cases.INDICATIONSThe use of panasil® primary contact light is highly recommended for: One-step impressions Arrange impressionsPRECISE IMPRESSIONSIt flows optimally and, thanks to its exceptional initial waterability, also guarantees reliability and accuracy in difficult oral situations. Dimensionally stable elastic recovery.EASY PROCESSINGFast and easy to apply using all conventional dispensing guns such as Applyfix® 4 for impression materials.EASY TO WORK WITHLow viscosity and stable at the same time, practical working time, short adjustment time inside the mouth. Also available as a quick-setting material with 3 minutes. Total setup time.

IDENTIUM® MEDUIM

0.00EGP(Price excludes VAT)

Identium Medium Penta

identium medium fast

Identium® Medium is a medium-viscosity monophase precision impression material made of Vinylsiloxanether® that is particularly well suited to implant impressions thanks to its very high final hardness.INDICATIONSThe use of identity® Medium is highly recommended for: Installation impressions Career impressions Single-phase impressions Pick-up impressionsSECURE FIXATIONThanks to the high final hardness (Shore A 60), the implant posts and primary crowns are precisely transferred and securely fixed.GREATEST PRECISIONThe ideal flow even with residual moisture allows to reliably determine the margins of the preparation. Thanks to the short preparation time inside the mouth, there is no deformation during the preparation phase.TIME SAVINGAfter just a total of 3 minutes and 30 seconds, the impression can be removed from the patient’s mouth (Identium® Medium Fast).MORE COMFORTABLE FOR USER AND PATIENTIt is easy to remove from the mouth thanks to high elasticity; low risk of breakage during the manufacture of the model. Neutral taste and aroma. Short adjustment time inside the mouth, a significant decrease in the gag reflex and movement.

Bond-1™

Teeth, pentron

0.00EGP(Price excludes VAT)

Bonding Agents Total Etch Primer/Adhesive Bond-1 Primer/Adhesive is a 5th generation total-etch bonding system that provides high bond strengths in a convenient single bottle application. This versatile system can be used for all your bonding procedures. Bond-1 Primer/Adhesive has been proven to create the ideal sealed surface and interpenetrated network of the polymerized primers and unfilled resin, resulting in a high bond with a low film thickness of only 8µm.Product Benefits Simple, time-saving and reliable fastening system High adhesion strength for both dentin and enamel A very versatile system - direct or indirect binding, with light compounds or chemical treatment, porcelain, metal restorations and Amalgam to the dental structure The low film thickness ensures the ideal surface for adhesion to restorative materials

Correct Plus™ and Correct Quick™ Bite Registration Material

Teeth, pentron

0.00EGP(Price excludes VAT)

الوصف صُممت شفرتا Correct Plus Bite Superfast و Correct Quick Bite لتوفير دقة عالية وتفاصيل دقيقة لنتائج العض. تتميز شفرات

IDENTIUM® HEAVY

0.00EGP(Price excludes VAT)

Identium® Heavy is a high-viscosity monophase precision impression material made of Vinylsiloxanether® that delivers particularly good results in the one-step technique thanks to the optimal pressure build-up when combined with Identium® LightINDICATIONS Identium® Heavy is highly recommended for:

One-step impressions

GREATEST PRECISION

Perfect flow even with residual moisture enables the preparation margins to be reliably determined.
Thanks to the short intraoral setting time, there is no deformation during the setting phase.

TIME SAVINGAfter a total of only 3 minutes and 30 seconds, the impression can be removed from the patient's mouth (identity® Heavy Fast). More comfortable for user and patientIt is easy to remove from the mouth thanks to high elasticity; low risk of breakage during the manufacture of the model. Neutral taste and aroma. Short adjustment time inside the mouth, a significant decrease in the gag reflex and movement.

PANASIL® MONOPHASE MEDIUM

0.00EGP(Price excludes VAT)

50mlPanasil® monophase Medium is a single-phase medium-viscosity impression material based also on silicone in a convenient 5: 1 Jumbo cartridge. The initial hydrophilicity is particularly high for accuracy even in extreme cases.INDICATIONSPanasil® monophase Medium is highly recommended for: Single-phase impressions Installation impressions Career impressions Pick-up impressionsPRECISE IMPRESSIONSIt flows optimally and, thanks to its exceptional initial waterability, also guarantees reliability and accuracy in difficult oral situations. Dimensionally stable elastic recovery properties.UNIVERSALLY APPLICABLEJust as suitable for preparing crowns/bridges, inlays/ onlays, and veneers as for fixation impressions.PERFECTLY CUSTOMIZEDThe practical, short intraoral setting time (2:00 min) combined with high final hardness (Shore A 60) enable particularly precise impressions of the three- dimensional relationships in the fixation.

Flow-It™ ALC™

Teeth, pentron

0.00EGP(Price excludes VAT)

A0 /A1/ A2/ A3/ CLEAR / W.OPAQ Flowable Composite that Cures in 3 Seconds! Flow-It! ALC®, a composite reconstructive material treated with direct light from Pentron®, represents a different method of dental restoration. The Flow-IT company gathers! ® ALC is between the utmost beauty and the need for a substance that "flexes" with age. It is the ideal compound for Class V restorations, where aesthetics and durability are paramount. It is also strongly indicated for use as a base under Category II restorations. Due to its versatility, Flow-It! ALC ® is a material that your business cannot afford to do without.Two unique characteristics make Flow-It!® ALC stand out from the crowd 1. 1. Flow-It!® ALC contains a unique resin matrix with a blend of ethoxilated BisGMA, improving stain resistance. 2. Flow-It! ® ALC is really highly Flowable:Does not require any hardware Requires little finishing It does not flow out of the tooth due to its rheostatic properties

PANASIL® INITIAL CONTACT X-LIGHT

0.00EGP(Price excludes VAT)

Initial contact Panasil® is a low-viscosity silicone-based impression material with a particularly high degree of initial hydrophilicity for accurate impression technology - reliable even in extreme situationsINDICATIONSThe use of Panasil® X-Light initial contact technology is highly recommended for: Two-step impressions Arrange impressionsPRECISE IMPRESSIONSIt flows optimally and, thanks to its exceptional initial waterability, also guarantees reliability and accuracy in difficult oral situations. Dimensionally stable elastic recovery.EASY PROCESSINGFast and easy to apply using all conventional dispensing guns such as Applyfix® 4 for impression materials.EASY TO WORK WITHLow viscosity and stable at the same time, practical working time, short adjustment time inside the mouth. Also available as a quick-setting material with 3 minutes. Total setup time.