Etching Gel is a 37% phosphoric acid gel used for etching enamel and dentin to prepare the tooth surface prior to the application of a bonding agent.
Related products
PANASIL® BINETICS PUTTY SOFT
Panasil® binetics Putty is a genuinely kneadable putty based on A silicone for precision impressions available in a 5:1 jumbo cartridge.INDICATIONSPanasil Pentex botesoft is highly recommended for:
Impressions of washing putty in one step
Determine the functional marginEASY PROCESSINGThe Fast version can be very easily trimmed.SECURITY THANKS TO PRECISIONDimensionally stable flexible recovery and consistent quality thanks to the repeatable accurate dosage of the large easy-to-use cartridge.
Very high dynamic pressure for optimal flow.ALWAYS THE RIGHT PRODUCTThe express version has a short adjustment time inside the mouth and a high final hardness (Shore A 63).
The soft version has a lower final hardness (Shore A 56) to ensure that it can be more easily removed from the mouth.
IDENTIUM® HEAVY
Identium® Heavy is a high-viscosity monophase precision impression material made of Vinylsiloxanether® that delivers particularly good results in the one-step technique thanks to the optimal pressure build-up when combined with Identium® LightINDICATIONS
Identium® Heavy is highly recommended for:
- One-step impressions
- Perfect flow even with residual moisture enables the preparation margins to be reliably determined.
- Thanks to the short intraoral setting time, there is no deformation during the setting phase.
Intensiv UniglossPaste
Intensiv UniglossPasteClinically tested and scientifically approved by the University of Zurich, SwitzerlandRef. 2500One-step ultra-fine universal diamond paste with fine grains uniquely adapted to the surface for a high-gloss finish for all aesthetic restorations
Perfectly smooth and shiny surfaces of fillings and treatment of reconstructive prostheses remain the basic requirement for all long-term oral restorations as well as the general improvement of the manifestations of aesthetic aspects: unigloss intensive paste, thanks to its special composition of Fine Diamonds with all its own features, represents the ideal universal product for finishing aesthetic restorations.
PANASIL® INITIAL CONTACT LIGHT
Initial contact Panasil® is a low-viscosity silicone-based impression material with a particularly high initial water capacity for accurate impression technology - reliable even in extreme cases.INDICATIONSThe use of panasil® primary contact light is highly recommended for:
One-step impressions
Arrange impressionsPRECISE IMPRESSIONSIt flows optimally and, thanks to its exceptional initial waterability, also guarantees reliability and accuracy in difficult oral situations.
Dimensionally stable elastic recovery.EASY PROCESSINGFast and easy to apply using all conventional dispensing guns such as Applyfix® 4 for impression materials.EASY TO WORK WITHLow viscosity and stable at the same time, practical working time, short adjustment time inside the mouth.
Also available as a quick-setting material with 3 minutes. Total setup time.
PANASIL® PUTTY SOFT
Panasil® Putty is a classic kneadable precision impression material available in a tub. Thanks to continuous refinement, you benefit from 35 years of experience, quality, and reliability.EASY PROCESSINGCan be very easily trimmed.RECISE WHILE ALSO VERY COST EFFECTIVEThe price / performance ratio is dimensionally stable and outstanding.
Very high dynamic pressure for optimal flow.ALWAYS THE RIGHT PRODUCTThe Soft version has a lower final hardness (Shore A 60) to ensure its removal from the mouth is even easier.INDICATIONSPanasil® paste is highly recommended for use in the following cases:
Impressions of washing putty in one step
Foil impressions
Flow-It™ ALC™
A0 /A1/ A2/ A3/ CLEAR / W.OPAQ
Flowable Composite that Cures in 3 Seconds!
Flow-It! ALC®, a composite reconstructive material treated with direct light from Pentron®, represents a different method of dental restoration. The Flow-IT company gathers! ® ALC is between the utmost beauty and the need for a substance that "flexes" with age. It is the ideal compound for Class V restorations, where aesthetics and durability are paramount. It is also strongly indicated for use as a base under Category II restorations. Due to its versatility, Flow-It! ALC ® is a material that your business cannot afford to do without.Two unique characteristics make Flow-It!® ALC stand out from the crowd
1. 1. Flow-It!® ALC contains a unique resin matrix with a blend of ethoxilated BisGMA, improving stain resistance.
2. Flow-It! ® ALC is really highly Flowable:Does not require any hardware
Requires little finishing
It does not flow out of the tooth due to its rheostatic properties
PANASIL® INITIAL CONTACT X-LIGHT
Initial contact Panasil® is a low-viscosity silicone-based impression material with a particularly high degree of initial hydrophilicity for accurate impression technology - reliable even in extreme situationsINDICATIONSThe use of Panasil® X-Light initial contact technology is highly recommended for:
Two-step impressions
Arrange impressionsPRECISE IMPRESSIONSIt flows optimally and, thanks to its exceptional initial waterability, also guarantees reliability and accuracy in difficult oral situations.
Dimensionally stable elastic recovery.EASY PROCESSINGFast and easy to apply using all conventional dispensing guns such as Applyfix® 4 for impression materials.EASY TO WORK WITHLow viscosity and stable at the same time, practical working time, short adjustment time inside the mouth.
Also available as a quick-setting material with 3 minutes. Total setup time.
MojoTM Veneer Cement
Mojo™ Veneer Cement shifts confidence, not shade! The latest in adhesive technology from Pentron®, Mojo Veneer Cement is a light cure, esthetic cementation system that is designed for use with porcelain, ceramic and composite veneer restorations. This ideal cement offers two very important features: try-in gels that consistently match the polymerized cement, and no detectable shade shift.Features & BenefitsUndetectable shade shift
The restoration virtually stays the same shade as on the first day you cured the cement
Matching try-in gels
Optimized for cured cement matching - what you try is what you get
Versatile shade options
Allows you to warm or brighten the restoration easily for a natural look; shades can be mixed for superlative shade customization
Easy storage
No refrigeration necessary for the Mojo cement and try-in gels
Easy clean up
Simply light cure for 1–2 seconds, and remove excess cement
