Etching Gel

Panasil® binetics Putty is a genuinely kneadable putty based on A silicone for precision impressions available in a 5:1 jumbo cartridge.INDICATIONSPanasil Pentex botesoft is highly recommended for: Impressions of washing putty in one step Determine the functional marginEASY PROCESSINGThe Fast version can be very easily trimmed.SECURITY THANKS TO PRECISIONDimensionally stable flexible recovery and consistent quality thanks to the repeatable accurate dosage of the large easy-to-use cartridge. Very high dynamic pressure for optimal flow.ALWAYS THE RIGHT PRODUCTThe express version has a short adjustment time inside the mouth and a high final hardness (Shore A 63). The soft version has a lower final hardness (Shore A 56) to ensure that it can be more easily removed from the mouth.

Initial contact Panasil® is a low-viscosity silicone-based impression material with a particularly high initial water capacity for accurate impression technology - reliable even in extreme cases.INDICATIONSThe use of panasil® primary contact light is highly recommended for: One-step impressions Arrange impressionsPRECISE IMPRESSIONSIt flows optimally and, thanks to its exceptional initial waterability, also guarantees reliability and accuracy in difficult oral situations. Dimensionally stable elastic recovery.EASY PROCESSINGFast and easy to apply using all conventional dispensing guns such as Applyfix® 4 for impression materials.EASY TO WORK WITHLow viscosity and stable at the same time, practical working time, short adjustment time inside the mouth. Also available as a quick-setting material with 3 minutes. Total setup time.

Initial contact Panasil® is a low-viscosity silicone-based impression material with a particularly high degree of initial hydrophilicity for accurate impression technology - reliable even in extreme situationsINDICATIONSThe use of Panasil® X-Light initial contact technology is highly recommended for: Two-step impressions Arrange impressionsPRECISE IMPRESSIONSIt flows optimally and, thanks to its exceptional initial waterability, also guarantees reliability and accuracy in difficult oral situations. Dimensionally stable elastic recovery.EASY PROCESSINGFast and easy to apply using all conventional dispensing guns such as Applyfix® 4 for impression materials.EASY TO WORK WITHLow viscosity and stable at the same time, practical working time, short adjustment time inside the mouth. Also available as a quick-setting material with 3 minutes. Total setup time.

Identium® Light is a low-viscosity precision impression material made of Vinylsiloxanether® that produces incredibly detailed impressions thanks to its high flowability even into the narrowest of sulci and even in extreme situations thanks to its high hydrophilicity.INDICATIONSThe use of identity® Light is highly recommended for: One-step impressions Arrange impressionsGREATEST PRECISIONThe ideal flow even with residual moisture allows the preparation margins to be reliably reproduced with the smallest furrow gaps. Thanks to the short preparation time inside the mouth, there is no deformation during the preparation phase.TIME SAVINGAfter just a total of 3 minutes and 30 seconds, the impression can be removed from the patient’s mouth (Identium® Light Fast).MORE COMFORTABLE FOR USER AND PATIENTThe long additional intraoral working time of 80 seconds (identity® Light) means that the material can be used comfortably even with extensive prosthetic restorations. Neutral taste and aroma. Short identification time inside the mouth.