Fast Shipping
(within 48 hours)
Technical support
Contact us
buy online
(100% secure)
special offers
(all year round)
TRAUS SUS20 Piezo Surgery System
132,700.00EGP
Strong B135 micro motor
10,000.00EGP
OZ BLACK MICROMOTOR WITH 50,000 RPM BRUSHLESS
32,000.00EGP
– DESKTOP TYPE
– ERGONOMIC DESIGN
– EXCELLENT DURABILITY
– POWERFUL TORQUE IN LOW SPEED
– FOR MANY DIFFERENT INDUSTRIES
– VARIABLE SPEED FOOT CONTROLLER
Related products
Correct Plus™ Fast Set
Hydrophilic impression material and unique viscosities
Correct Plus Hydrophilic Impression Material is a versatile impression material designed to accommodate all impression techniques. A low contact angle of ˜30° guarantees outstanding detail in the presence of fluids. Exceptional tear strength ensures your detailed impression will remain intact upon removal. With a working time of 1 minute and 30 seconds and an oral setting time of 3 minutes and 30 seconds, Correct Plus Material is the ideal material for full arch impressions or any situation where a longer set time is desired. Correct Plus Material is available in 50ml auto-mix cartridges, 380ml Mighty Mix™ cartridges for use in automated mixing machines, and 460ml sets of hand mixed putty. Correct Plus Impression Material provides multiple packaging options to satisfy all of your impression needs.
Correct Plus™ really does it all:
It stacks!
The Thick’n Thin® Light Body stacks on the tooth like a medium body.
It flows!
The Thick’n Thin® melts after a few seconds to flow deep into sub-gingival areas, just like a light body.
It drives!
The Correct Plus™ Putty has a superior viscosity, so it can push the wash material deeper into the sulcus.
Build-It syringe Material
Fiber-Reinforced automix core build-up system
Clinically proven, Build-It!® F.R. is now available in a very convenient Mini-Mix syringe. Now you can auto-mix without a gun. Get easier access to the preparation, better visibility and less waste.
FASTER
Build-It!® F.R. is an automix system, just like impression material cartridges. Using the intra-oral tips, you can inject right into the preparation or into the Core-Forms. Core build-up has never been this easy.
LESS EXPENSIVE
مع Build-It! ® F.R. , Do not pay extra for convenience-in fact, Build-it! ® F.R. They can cost up to 5 times less than comparable basic materials. The cartridge delivery system also ensures that exactly what you need is mixed - with only a small amount of waste at the mixing tip.
PANASIL® MONOPHASE MEDIUM
50ml
Panasil® monophase Medium is a single-phase medium-viscosity impression material based also on silicone in a convenient 5: 1 Jumbo cartridge. The initial hydrophilicity is particularly high for accuracy even in extreme cases.
INDICATIONS
Panasil® monophase Medium is highly recommended for:
Single-phase impressions
Installation impressions
Career impressions
Pick-up impressions
PRECISE IMPRESSIONS
It flows optimally and, thanks to its exceptional initial waterability, also guarantees reliability and accuracy in difficult oral situations.
Dimensionally stable elastic recovery properties.
UNIVERSALLY APPLICABLE
Just as suitable for preparing crowns/bridges, inlays/ onlays, and veneers as for fixation impressions.
PERFECTLY CUSTOMIZED
The practical, short intraoral setting time (2:00 min) combined with high final hardness (Shore A 60) enable particularly precise impressions of the three- dimensional relationships in the fixation.
IDENTIUM® LIGHT
Identium® Light is a low-viscosity precision impression material made of Vinylsiloxanether® that produces incredibly detailed impressions thanks to its high flowability even into the narrowest of sulci and even in extreme situations thanks to its high hydrophilicity.
INDICATIONS
The use of identity® Light is highly recommended for:
One-step impressions
Arrange impressions
GREATEST PRECISION
The ideal flow even with residual moisture allows the preparation margins to be reliably reproduced with the smallest furrow gaps.
Thanks to the short preparation time inside the mouth, there is no deformation during the preparation phase.
TIME SAVING
After just a total of 3 minutes and 30 seconds, the impression can be removed from the patient’s mouth (Identium® Light Fast).
MORE COMFORTABLE FOR USER AND PATIENT
The long additional intraoral working time of 80 seconds (identity® Light) means that the material can be used comfortably even with extensive prosthetic restorations.
Neutral taste and aroma. Short identification time inside the mouth.
MojoTM Veneer Cement
Mojo™ Veneer Cement shifts confidence, not shade! The latest in adhesive technology from Pentron®, Mojo Veneer Cement is a light cure, esthetic cementation system that is designed for use with porcelain, ceramic and composite veneer restorations. This ideal cement offers two very important features: try-in gels that consistently match the polymerized cement, and no detectable shade shift.
Features & Benefits
Undetectable shade shift
The restoration virtually stays the same shade as on the first day you cured the cement
Matching try-in gels
Optimized for cured cement matching - what you try is what you get
Versatile shade options
Allows you to warm or brighten the restoration easily for a natural look; shades can be mixed for superlative shade customization
Easy storage
No refrigeration necessary for the Mojo cement and try-in gels
Easy clean up
Simply light cure for 1–2 seconds, and remove excess cement
PANASIL® PUTTY SOFT
Panasil® Putty is a classic kneadable precision impression material available in a tub. Thanks to continuous refinement, you benefit from 35 years of experience, quality, and reliability.
EASY PROCESSING
Can be very easily trimmed.
RECISE WHILE ALSO VERY COST EFFECTIVE
The price / performance ratio is dimensionally stable and outstanding.
Very high dynamic pressure for optimal flow.
ALWAYS THE RIGHT PRODUCT
The Soft version has a lower final hardness (Shore A 60) to ensure its removal from the mouth is even easier.
INDICATIONS
Panasil® paste is highly recommended for use in the following cases:
Impressions of washing putty in one step
Foil impressions
Intensiv UniglossPaste
Intensiv UniglossPaste
Clinically tested and scientifically approved by the University of Zurich, Switzerland
Ref. 2500
One-step ultra-fine universal diamond paste with fine grains uniquely adapted to the surface for a high-gloss finish for all aesthetic restorations
Perfectly smooth and shiny surfaces of fillings and treatment of reconstructive prostheses remain the basic requirement for all long-term oral restorations as well as the general improvement of the manifestations of aesthetic aspects: unigloss intensive paste, thanks to its special composition of Fine Diamonds with all its own features, represents the ideal universal product for finishing aesthetic restorations.
