Fast Shipping
(within 48 hours)
Technical support
Contact us
buy online
(100% secure)
special offers
(all year round)
Intensiv ProxoStrip
776.25EGP
Scientifically tested by the University of Ancona, Italy
Ref. PX4015/6 Package of 6 Strips
Ref. PX4015/12 Package of 12 Strips
A unique, diamond-coated metal strip with grips for the final polishing of proximal surfaces
Intensiv ProxoStrip is a unique double diamond-coated metal strip with two working areas with a grit of 40μm (red) and 15μm (yellow) respectively and perforated strip ends for a secure and ergonomic grip. The total length of the strips (80mm) enables simplified finger support (hypomochlion) during treatment. The 2.5mm height of the strip as well as the free zone between the working areas preserve the existing contact point.
Related products
IDENTIUM® MEDIUM
| Identium Medium Penta |
| identium medium fast |
TempSpan™
Create temporary restorations rapidly
TempSpan® Dual Cure Temporary Crown & Bridge Material is specifically formulated to produce highly esthetic and durable provisional restorations in the shortest time possible. The unique dual cure ability of TempSpan® C&B Material provides clinicians with the choice to light cure in 60 seconds or self cure in 2 minutes. And with seven standard shades available, TempSpan® C&B Material offers the widest range of shades available to provide you with the best possible match to natural dentition.
Composite Resin Formula
The innovative composite chemistry of TempSpan® C&B Material offers several features and benefits over traditional auto-mix provisional materials. The unique, acrylic-free, resin-based formulation of TempSpan® C&B Material provides outstanding physical properties to ensure reliable performance for both single unit restorations and multi-unit bridges. Because of its composite formulation, provisional restorations made with TempSpan® C&B Material can be easily repaired or touched up with flowable composites such as Pentron®’s Flow-It™ ALC™ Flowable Composite. Supplied in a 50ml, auto-mix 1:1 ratio delivery system, TempSpan® C&B Material enables you to use your standard impression material gun.
Intensiv UniglossPolisher
Intensiv UniglossPolisher
Scientifically proven and clinically tested at the University of Zurich, Switzerland
Ref. 2300/6: trial pack with 3 polishers each, flame and cup
Ref. 2310/6: pack of 6 polishers, flame
Ref. 2320/6: pack of 6 polishers, cup
Stable polymer diamond polisher shape for high gloss polishing for aesthetic restorations
"The flame remains a flame even with multiple use!".
A thin flame and a stable cup of polymeric material loaded with a high degree of ultra-fine diamond. The heart of the new shape of the polisher is made of additional hard plastic and completely follows the shapes of the flame and cups.
Extremely smooth and glossy surfaces for aesthetic restorations remain the basic requirement for all long-term oral restorations as well as the overall improvement of aesthetic aspects in appearance.
For clear restorations of concave and convex surfaces, the most suitable polishing tool should be selected.
The preservation of the created macro-geography and the closed margins of the restorations during polishing are the aesthetic fundamentals and longevity of sound restorations.
PANASIL® INITIAL CONTACT LIGHT
Initial contact Panasil® is a low-viscosity silicone-based impression material with a particularly high initial water capacity for accurate impression technology - reliable even in extreme cases.
INDICATIONS
The use of panasil® primary contact light is highly recommended for:
One-step impressions
Arrange impressions
PRECISE IMPRESSIONS
It flows optimally and, thanks to its exceptional initial waterability, also guarantees reliability and accuracy in difficult oral situations.
Dimensionally stable elastic recovery.
EASY PROCESSING
Fast and easy to apply using all conventional dispensing guns such as Applyfix® 4 for impression materials.
EASY TO WORK WITH
Low viscosity and stable at the same time, practical working time, short adjustment time inside the mouth.
Also available as a quick-setting material with 3 minutes. Total setup time.
PANASIL® MONOPHASE MEDIUM
50ml
Panasil® monophase Medium is a single-phase medium-viscosity impression material based also on silicone in a convenient 5: 1 Jumbo cartridge. The initial hydrophilicity is particularly high for accuracy even in extreme cases.
INDICATIONS
Panasil® monophase Medium is highly recommended for:
Single-phase impressions
Installation impressions
Career impressions
Pick-up impressions
PRECISE IMPRESSIONS
It flows optimally and, thanks to its exceptional initial waterability, also guarantees reliability and accuracy in difficult oral situations.
Dimensionally stable elastic recovery properties.
UNIVERSALLY APPLICABLE
Just as suitable for preparing crowns/bridges, inlays/ onlays, and veneers as for fixation impressions.
PERFECTLY CUSTOMIZED
The practical, short intraoral setting time (2:00 min) combined with high final hardness (Shore A 60) enable particularly precise impressions of the three- dimensional relationships in the fixation.
PANASIL® INITIAL CONTACT X-LIGHT
Initial contact Panasil® is a low-viscosity silicone-based impression material with a particularly high degree of initial hydrophilicity for accurate impression technology - reliable even in extreme situations
INDICATIONS
The use of Panasil® X-Light initial contact technology is highly recommended for:
Two-step impressions
Arrange impressions
PRECISE IMPRESSIONS
It flows optimally and, thanks to its exceptional initial waterability, also guarantees reliability and accuracy in difficult oral situations.
Dimensionally stable elastic recovery.
EASY PROCESSING
Fast and easy to apply using all conventional dispensing guns such as Applyfix® 4 for impression materials.
EASY TO WORK WITH
Low viscosity and stable at the same time, practical working time, short adjustment time inside the mouth.
Also available as a quick-setting material with 3 minutes. Total setup time.
Fusio™ Liquid Dentin
A Fusion of Composite & Adhesive Technology
Fusio TM Liquid Dentin represents the natural evolution of the composite resin technology that doctors have been waiting for
Fusio TM Liquid Dentin, a self-adhesive Flowable compound, combines the advantages of adhesives and reconstructive technology in one product, bringing restoration technologies to new unprecedented heights. Simply inject into the preparation, stir, treat the light. Once Fusio TM Liquid Dentin is applied, the conditions, bonds, and sealants are without the need for anesthetic or adhesive. With such unique applications as dentin replacement or self-adhesive base liner, Fusio TM Liquid Dentin will change the way you look at restorative dentistry. Best of all, Fusio TM Liquid Dentin costs less than the premium Flowable compounds and separate adhesives required
Features & Benefits
Self-adhesive
Bonds to dentin and enamel without a separate bonding agent.
Versatile
Can be used alone or together with bonded composites.
Seals dentin
Offers the potential for reduced sensitivity.
Increases profitability
Improves procedure efficiency by reducing the time, steps, & materials needed.
Radiopaque
Easily stands out on x-rays for quick and easy diagnosis.
Esthetic
Available in four of the most popular Vita® shades: A1, A2, A3, & B1.
Flow-It™ ALC™
Flowable Composite that Cures in 3 Seconds!
Flow-It! ALC®, a composite reconstructive material treated with direct light from Pentron®, represents a different method of dental restoration. The Flow-IT company gathers! ® ALC is between the utmost beauty and the need for a substance that "flexes" with age. It is the ideal compound for Class V restorations, where aesthetics and durability are paramount. It is also strongly indicated for use as a base under Category II restorations. Due to its versatility, Flow-It! ALC ® is a material that your business cannot afford to do without.
Two unique characteristics make Flow-It!® ALC stand out from the crowd
1. 1. Flow-It!® ALC contains a unique resin matrix with a blend of ethoxilated BisGMA, improving stain resistance.
2. Flow-It! ® ALC is really highly Flowable:
Does not require any hardware
Requires little finishing
It does not flow out of the tooth due to its rheostatic properties
