Fast Shipping
(within 48 hours)
Technical support
Contact us
buy online
(100% secure)
special offers
(all year round)
Breeze™ RMGI Cements
2,172.83EGP
Resin modified glass Ionic dental cement
Easy to treat. Easy to clean. Easy to please.
We make permanent restorations very easy with Pentron's new RMGI cement. Breeze TM RMGI provides stable and long-lasting restoration with great bonding strength for zirconia, PFM and metal crowns.
Its exceptional physical properties, from moisture tolerance and constant fluoride release, to high beam visibility and dual processing options ensure maximum versatility and greater durability.
In addition, with fast treatment capabilities of 2-3 seconds, Breeze reduces the excess time for faster and effortless cleaning. So when it comes to easy handling, outstanding power and top performance, choose Breeze RMGI and you're ready.
Previous prices are inclusive of VAT (14%) and excluding shipping expenses. * Please note that the prices are currently constantly changing due to market fluctuations and the prices will be confirmed before shipping or you can inquire by contacting and requesting a quote.
pentron Teeth
Related products
PANASIL® PUTTY SOFT
Panasil® Putty is a classic kneadable precision impression material available in a tub. Thanks to continuous refinement, you benefit from 35 years of experience, quality, and reliability.
EASY PROCESSING
Can be very easily trimmed.
RECISE WHILE ALSO VERY COST EFFECTIVE
The price / performance ratio is dimensionally stable and outstanding.
Very high dynamic pressure for optimal flow.
ALWAYS THE RIGHT PRODUCT
The Soft version has a lower final hardness (Shore A 60) to ensure its removal from the mouth is even easier.
INDICATIONS
Panasil® paste is highly recommended for use in the following cases:
Impressions of washing putty in one step
Foil impressions
IDENTIUM® HEAVY
Identium® Heavy is a high-viscosity monophase precision impression material made of Vinylsiloxanether® that delivers particularly good results in the one-step technique thanks to the optimal pressure build-up when combined with Identium® Light
INDICATIONS
Identium® Heavy is highly recommended for:
- One-step impressions
- Perfect flow even with residual moisture enables the preparation margins to be reliably determined.
- Thanks to the short intraoral setting time, there is no deformation during the setting phase.
Flow-It™ ALC™
Flowable Composite that Cures in 3 Seconds!
Flow-It! ALC®, a composite reconstructive material treated with direct light from Pentron®, represents a different method of dental restoration. The Flow-IT company gathers! ® ALC is between the utmost beauty and the need for a substance that "flexes" with age. It is the ideal compound for Class V restorations, where aesthetics and durability are paramount. It is also strongly indicated for use as a base under Category II restorations. Due to its versatility, Flow-It! ALC ® is a material that your business cannot afford to do without.
Two unique characteristics make Flow-It!® ALC stand out from the crowd
1. 1. Flow-It!® ALC contains a unique resin matrix with a blend of ethoxilated BisGMA, improving stain resistance.
2. Flow-It! ® ALC is really highly Flowable:
Does not require any hardware
Requires little finishing
It does not flow out of the tooth due to its rheostatic properties
PANASIL® MONOPHASE MEDIUM
50ml
Panasil® monophase Medium is a single-phase medium-viscosity impression material based also on silicone in a convenient 5: 1 Jumbo cartridge. The initial hydrophilicity is particularly high for accuracy even in extreme cases.
INDICATIONS
Panasil® monophase Medium is highly recommended for:
Single-phase impressions
Installation impressions
Career impressions
Pick-up impressions
PRECISE IMPRESSIONS
It flows optimally and, thanks to its exceptional initial waterability, also guarantees reliability and accuracy in difficult oral situations.
Dimensionally stable elastic recovery properties.
UNIVERSALLY APPLICABLE
Just as suitable for preparing crowns/bridges, inlays/ onlays, and veneers as for fixation impressions.
PERFECTLY CUSTOMIZED
The practical, short intraoral setting time (2:00 min) combined with high final hardness (Shore A 60) enable particularly precise impressions of the three- dimensional relationships in the fixation.
Intensiv UniglossPaste
Intensiv UniglossPaste
Clinically tested and scientifically approved by the University of Zurich, Switzerland
Ref. 2500
One-step ultra-fine universal diamond paste with fine grains uniquely adapted to the surface for a high-gloss finish for all aesthetic restorations
Perfectly smooth and shiny surfaces of fillings and treatment of reconstructive prostheses remain the basic requirement for all long-term oral restorations as well as the general improvement of the manifestations of aesthetic aspects: unigloss intensive paste, thanks to its special composition of Fine Diamonds with all its own features, represents the ideal universal product for finishing aesthetic restorations.
PANASIL® PUTTY & PUTTY FAST
Panasil® Putty is a classic kneadable precision impression material available in a tub. Thanks to continuous refinement, you benefit from 35 years of experience, quality, and reliability.
EASY PROCESSING
Can be very easily trimmed.
RECISE WHILE ALSO VERY COST EFFECTIVE
The price / performance ratio is dimensionally stable and outstanding.
Very high dynamic pressure for optimal flow.
ALWAYS THE RIGHT PRODUCT
The Fast version has a short intraoral setting time and a high final hardness (Shore A 66)
INDICATIONS
Panasil® paste is highly recommended for use in the following cases:
Two-step impressions
Foil impressions
Panasil paste is highly recommended for use in the following cases:
Two-step impressions
Foil impressions
Intensiv UniglossPolisher
Intensiv UniglossPolisher
Scientifically proven and clinically tested at the University of Zurich, Switzerland
Ref. 2300/6: trial pack with 3 polishers each, flame and cup
Ref. 2310/6: pack of 6 polishers, flame
Ref. 2320/6: pack of 6 polishers, cup
Stable polymer diamond polisher shape for high gloss polishing for aesthetic restorations
"The flame remains a flame even with multiple use!".
A thin flame and a stable cup of polymeric material loaded with a high degree of ultra-fine diamond. The heart of the new shape of the polisher is made of additional hard plastic and completely follows the shapes of the flame and cups.
Extremely smooth and glossy surfaces for aesthetic restorations remain the basic requirement for all long-term oral restorations as well as the overall improvement of aesthetic aspects in appearance.
For clear restorations of concave and convex surfaces, the most suitable polishing tool should be selected.
The preservation of the created macro-geography and the closed margins of the restorations during polishing are the aesthetic fundamentals and longevity of sound restorations.
